Рус Eng
Sintez South

High viscosity

TU 2226-173-00203335-2007, rev. 1-9

Production method:polycondensation in diphenylcarbonate and bisphenol-A-melt.

Application: production of goods through extrusion and injection molding.

Note: Description of additional indices to base grades as follows: U-ultraviolet stabilized grades;

R-improved antistick properties; L., L1-low b (yellowness and blue) index value: 1.3-1.6; 0.8-1.3 Norms and requirements for PC quality parameters with additional indices are the same as for PC grades without additional indices.

Packaging: the Polycarbonates are packaged in bags asper GOST 17811 or in similar polymer bags as per technical documentation approved under the appropriate procedure and related to import as well.

The bags neck should be sealed in. Polycarbonates are also packaged in sealed soft special containers for bulk solids asper technical documentation approved under the appropriate procedure and related to import as well.

Packages should be tightly sewed.

Polycarbonate weight in bag should be (25+0.25) kg, in big-bag (750+3.75) kg, (850+4.25) kg, (1000+5.0) kg.

Handling and storage: transportation by any modes of roofed transport in accordance with transport regulations valid for the related mode of transport.

To be stored indoors excluding direct sun and at least 1m away from heating devices at temperature not exceeding 35°C.

0.01464 сек / 0.255 MB