Рус Eng
Sintez South

Low viscosity

TU 2226-173-002O3335-2007, rev. 1.9

Production method:polycondensation in diphenylcarbonate and bisphenol-A-melt.

Application: production of goods through injection molding.

Note: Description of additional indices to base grades as follows:

U-ultraviolet stabilized grades,

R-improved antistick properties, L., L1-low b (yellowness and blue) index value: 1..3-1.6; 0.8-1.3 Norms and requirements for PC quality parameters with additional indices are the same as for PC grades without additional indices.

Packing: polycarbonates are packed in bags as per GOST17811 or in similar polymer bags in accordance with technical documentation approved under the appropriate procedure, including that related to imports. The bags neck should be sealed. Polycarbonates can also be packed in sealed soft special containers for bulk solids asper technical documentation approved under the appropriate procedure, including that related to imports.

Packings should be tightly sewed. Polycarbonate weight in bag should be 25 (+0.25) kg, in containers - 750 (+3.75) kg or 1000 (+5.0) kg. Handling and storage: transportation by any modes of roofed transport in accordance with transport regulations valid for the related mode of transport.

To be stored indoors excluding direct sun and at least 1m away from heating devices at temperature not exceeding 35°C.

0.01827 сек / 0.255 MB